 |
|
|
|
| |
|
| |
|
| |
|
| |
|
Options for 38" [96cm], 48" [122cm], 58" [147cm] and 66" [168cm] Precision Chippers |
|
|
|
| 
Dissipator for rear discharge
The circular movements of the
chips greatly reduce the force
of the chip flow and chips are
spread more evenly. Available for
all four chipper sizes. Cyclone
sizes from 4' to 8' [1.2m to 2.4m]
in diameter.
| 
Drop or Gravity Feed Chipper
OPTIONS:
Horizontal Feed or Drop Feed
Left or Right
Discharge - Top, bottom, end or back
360 deg. Swivel discharge for
trailer loading. |
|
|
| |
|
SLICING
INSTEAD
OF CHOPPING
|
The canted side spout design and the position of
the knife causes a smooth slicing action. The attack angle
of the knife gives a gentle lift to the slab as the knife
passes the center line and begins the upward swing turning
the slab counterclockwise. The spout has a flat bottom
and canted side to give 25 % more anvil contact, preventing
slapping and wood turning in the wrong direction. Horizontal
and vertical anvils give additional life, requiring less
maintenance. Both anvils are hard surfaced with Colmonoy
with a hardness of 62 - 65, Rockwell C scale. With a four
sided replaceable anvil, maintenance and time are saved.
Less horsepower is needed with Precision's smoother action.
|
|
|
| |
|
|
|
Chipper Size |
No. of Knives |
Spout Opening |
Max. Operating RPM |
Disc Diameter |
Approx. Feed Rate |
Avg. Cord Hour |
Pulley Shaft Size |
| 38 |
4 |
9" x 20" |
1000 |
38" |
250fpm |
26 |
2-15/16" |
[229mm x 500mm] |
[965mm] |
[76mpm] |
[95cu.m] |
[75mm] |
48 |
3,4,6 or 8 |
11" x 24" |
900 |
48" |
337fpm |
40 |
3-15/16" |
[280mm x 610mm] |
[1220mm] |
[102mpm] |
[146cu.m] |
[100mm] |
58 |
3,4,6 or 8 |
15" x 34" |
720 |
58" |
270fpm |
54 |
4-7/16" |
[380mm x 865mm] |
[1475mm] |
[82mpm] |
[198cu.m] |
[113mm] |
66 |
3,4,6 or 8 |
17" x 37.5" |
600 |
66" |
300fpm |
74 |
4-15/16" |
[430mm x 950mm] |
[1675mm] |
[91mpm] |
[270cu.m] |
[125mm] |
|
|
| |
|
ENGINEERED
FOR PERFORMANCE
|
|
|
| |
Precision chippers are more efficient, producing consistently
sized chips with greater capacity.
The 38" will accommodate a 20" [ 500mm] slab and 9" [230mm] roundwood
The 48" takes 24" [700mm] slabs and 11" 280mm] roundwood.
The 58" takes 30" [865mm] slabs and 15" [380mm] roundwood.
The 66" takes 32" [950mm] slabs and 17" [430mm] roundwood.
|
|
|
| |
|
| |
|
|
|
|
|
