- Double 4" [102mm] x 12" [305mm] x 1/2" [13mm] box section frame.
- Tri-axle carrier fifth wheel.
- Tire size 11R22.5
- 10 Hole bud-style wheels
- Four (4) hydraulic stabilizers
Husky XL-175 Log Loader:
- 24'-2" [7.3m] Boom length with hinged heel
- 42" [1067mm] Continuous rotation grapple
- Operators cab 44" [1118mm] x 54" [1372mm] tilts hydraulically for transporting.
- Lift capacity 12,640 lbs [5745kg] at 15' [4.6m]
- Precision Model 2366, 3-knife
- 23" [585mm] log capacity with ATD 218 Wichita air clutch
- Hydraulic swivel telescoping discharge spout.
- In-frame dirt separator
- One (1) 12CFM, mounted on each engine.
- Two (2) Hydrostatic
- Two (2) Pressure compensated
- One (1) Quad, 42,42,32,32 gpm [158,158,121,121 Lpm]
- 500 gallon [1893 L] hydraulic reservoir
- Twin oil coolers.
- 156 special short link - 5/8" [16mm] x 8-link.
- CAT / Cummins 600HP [448kw] and up main engine (chipper and loader)
- CAT / Cummins 390HP [291kw] and up engine (hydraulic drive and flail drums)
- One (1) 450 gallon fuel tank.
- Dual drum debarker / flail type, with 24" [610mm] x 52" [1320mm] opening
- Top and bottom infeed rolls for debarker.
- Five (5) powered in-feed rollers
- One (1) Top roll for chipper infeed
- One (1) 13' [4m] long in frame waste conveyor
- One (1) 30' [9.1m] long, 5' [1.5m] wide folding bark conveyor, 13'-4" [4m] dump height
- Third flail - optional
Overall Weight & Dimensions:
- Width: 12' [3.7m]
- Length: 46'-10" [14.3m]
- Weight: 114,600 lbs [ 52090kg] approximate
- Height: 13'-6" [4.1m] (with cab tilted)
- Ground clearance 10" [254mm]
- Below freezing heaters
- Flexxaire fan
- Combination air conditioning / heater
- Joystick controls (5 function)
- Joystick seat
- Audible temperature horn
- Six (6) boom and cab lights
- Long chip spout
- Third debarking drum
- Variable speed controls